Product Description
Level your Nissan Frontier using Z1's Front Lift Spacer. This spacer is installed between the front shock mount and the frame, providing your truck with approximately 1.5'' of front lift on stock suspension. Installation of the spacer improves visual appeal by leveling the front of the truck while increasing ground clearance for better tire to fender clearance while improving off-road performance. The Z1 Leveling Kit is easy to install and can be done without disassembling the front shock, making it the easiest lift you can install on your truck! Because the spacer is installed outside the strut assembly, your truck will maintain its factory ride characteristics and quality with no added spring pre-load or harshness.
Z1 lift spacers are manufactured from 6061-T6 aluminum, the highest temper grade available for increased durability in all conditions. Each spacer is finished in a black anodized coating with a laser-etched Z1 logo and includes all new hardware.
Heavily loaded trucks or trucks with sagging or worn front springs may require an additional spacer to level the truck properly. Because we commonly see this on higher mileage trucks, we manufactured a +5mm spacer for fine-tuning that can be purchased HERE!
Note: We recommend installing Aftermarket Adjustable Upper Control Arms on Pro4X models. Trucks with stock arms will notice contact between the control arm and coil spring bucket at full droop. Variance in production tolerance on Non-Pro4X models may or may not encounter coil bucket contact at full droop. An Eccentric Bolt Kit is recommended to align vehicle back to factory specifications.
Total Lift:
Pro4X Models
Non-Pro4X Models
Features:
- Easy to install
- Fits 2WD and 4WD
- Improves Visual Appeal
- Maintains factory ride characteristics
- Increased ride height and ground clearance
- Compatible with any front shock or coilover
Recommended Parts to Complete Assembly: (click links)
Fits:
*** This item does not qualify for any additional discounts or promotions *** |
 |
Small Zino Decal
starstarstarstarstar (28)
$4
OEM Nissan Oil Filter
starstarstarstarstar (26)
$6.44
Z1 Stuffed Plush Zino
starstarstarstarstar (4)
$8.99
Z1 New Frontier T-Shirt
starstarstarstarstar (2)
$19.99
Z1 Motorsports 3D "Z1 Emblem"
starstarstarstarstar_half (56)
$6
Z1 300ZX (Z32) High-Lift Hood Strut Kit
starstarstarstarstar_half (45)
$90.99
Z1 Off-Road Roll-Up Tool Bag
starstarstarstarstar (6)
$29.99
Z1 Outfit & Explore T-Shirt
$19.99
Z1 New Frontier T-Shirt
starstarstarstarstar (2)
$19.99
Z1 Knock Knock T-Shirt
starstarstarstarstar (1)
$23.99
Z1 Suction Cup Phone Mount
starstarstarstarstar (1)
$49.99
Z1-Offroad Flannel - Charcoal Black
starstarstarstarstar (1)
$39.99
starstarstarstarstar
Cale
March 29, 2025
Great way to get some life out of your stock suspension, get rid of that stock front end rake and save some money for beer! Good quality spacers to use on future coilover lifts when the time comes.
starstarstarstarstar
LEE
March 6, 2025
Perfect for leveling my 24 ProX.
starstarstarstarstar
Daniel
February 27, 2025
Great fit no issues, good quality.
starstarstarstarstar
Harold
February 12, 2025
Great product, great price
starstarstarstarstar
Jeff
January 19, 2025
Had these for a couple, just installed today along with lower eccentric bolt kit. Most everything when smooth and give my truck the desired stance. Very satisfied with the quality and customer service with the questions I had. Great product/company
starstarstarstarstar
David
September 15, 2024
The Z1 Off-Road 1 1/2” Frontier 2022+ Level Kit was well made and did exactly what it said it would by raising the front of my truck exactly 1.5”. Was a bit of a struggle trying to separate the upper control arm(s) but ended up not needing to as I could remove the strut, assemble the spacer and reassemble without ever separating it. No contact between the upper control arm and coil bucket that I have noticed since installing the kit a week ago on my new 2024 Frontier. Shipping took a bit longer than expected. Overall very satisfied!
starstarstarstarstar
Dane
September 9, 2024
'Purchased this "leveling" kit about a week ago and received in a timely fashion. The spacers looked to be of a good quality and as described on the website. I personally installed them on my '23 Frontier SV - about a 4 hour process. I could only do one side at-a-time since I was using a single jack. I didn't rush this install and made sure everything was torqued to specs.
Tips:
1. use an impact wrench (at least 200 ft./lbs. capacity) to remove the bolts/nuts
2. Disconnect the front stabilizer/sway bar from BOTH sides BEFORE attempting to jack-up either side, otherwise binding will occur when attempting to remove when one side is lifted. Optimally, use a lift that can raise both sides simultaneously and it will be a non-issue,
3. Use a "click-style" or better torque wrench
This improved (IMHO) the look of the truck. It appears to sit level. (rear is about 6" and the front is about 6.5"). Blessings ...
PS 'be happy to share my "lift" experience with others ...
starstarstarstar_borderstar_border
Ben
July 12, 2024
Well made, but the install was a huge pain. Lot more suspension disassembly were needed than what was expected.
starstarstarstarstar
Justin
April 18, 2024
Great product second truck using Z1 spacers. Paired these with Rough Country 2.5" lift struts and the pucks help finish it nicely.
starstarstarstarstar
Robert
March 3, 2024
Parts worked perfectly, exactly what I was looking for
starstarstarstarstar
Robert
March 3, 2024
Parts worked perfectly, exactly what I was looking for
starstarstarstarstar
Darren
January 31, 2024
starstarstarstarstar
Vincent
January 1, 2024
Installed these within a week of buying the truck new. 5000miles now navigating many of those on NV gravel/graded dirt roads and never once had the upper A-arms contact the coil tower. I am running a winch bumper with winch, full steel skids, and a bed cap. These perfectly leveled the truck. Super easy install with no re-alignment needed.
starstarstarstarstar
Chester
December 9, 2023
It perfectly leveled my truck, not to high or low just made it even with hight of the bed but still has the slope to drain rain water off the bed cover. thank you Z1 team
starstarstarstarstar_border
Richard
November 27, 2023
Visual instructions could have been better. Didn’t know I would have to shave a couple of mm off the top hat bolts. Just installed yesterday. Also had to turn the shock around where Z1 was facing out, the Bilsteins 5100 doesn’t tell you which is left or right. I don’t even know if I have it on right.
starstarstarstarstar
Michael
November 2, 2023
Leveled my truck perfectly! This is how it should come from the factory Thanx Z1
starstarstarstarstar
Benedict
September 23, 2023
Makes my D41 Frontier look aesthetically pleasing now that the front is leveled to the rear.
starstarstarstarstar
Wesley
December 21, 2022
Perfectly leveled my 2022 Pro4X. Couldn’t be more ecstatic about the results. Ride quality is still good and so far haven’t noticed any coil bucket contact! Z1 is the real deal!!
starstarstarstarstar
Jeremy
August 12, 2022
starstarstarstarstar
Jonathan
August 6, 2022
Very well made .. would be better if it came as kit with new cam bolts where you can install and get it Realigned because it’s he 2022 Nissan Frontier doesn’t have cam bolts .
ASRIUBNFAIURNFKAJSNFLAKJSDNFLKASNDFLKASDNMFALKSNDFOANEF