Use these extensions with our 56" low profile car ramps. These allow the really low profile cars to better work with our normal low profile ramps.

Is your car really low? Then these are the perfect addition to our 2 pc, 56" low profile car ramps. These extensions will lower your approach angle to 6.6 degrees. Once you get the car into place, you can remove the extensions for more working room under the vehicle. One set holds up to 3000 lbs.

Note: These will only work with our 56" 2 pc. low profile ramps part # 006143SCH01A.

Like our Schwaben ramps, these extensions are solidly built and will not scoot, slip or slide. Just like all of our ramp products, our extensions will not hurt or mar your floors.

Specs:

45" long, 12" wide

100% solid core design.

Includes tabs on side to keep in place.

1. Take a yardstick, and wedge it under the front edge of front tire.

2. Raise it up until it hits the underside of your car( the spoiler)

3. Measure from the tip of the yardstick to the ground, vertically.

If your measurement is 5" or greater, you can clear with these ramps extensions with no problem.

For increased safety, use wheel chocks with all Schwaben Ramp products.